- Hobbies & Models
- Crafts & Art
- Science & Educational
|These products are offered through our affiliation with Amazon.com and are subject to Amazon.com terms and conditions.|
Originally intended for infantry support duties, Germany's Sturmgeschutz (assault gun) and abbreviated "StuG" III first appeared in combat during 1940. It had the durable Panzer III chassis with a completely new superstructure. To keep the vehicles profile as low as possible, the revolving turret was eliminated and the short barreled 75mm L/24 gun was mounted directly onto the hull. As it was mainly intended for close fire support for the Wehrmacht, it was used as self-propelled artillery against the opposing enemy's strategic points. However, when the German forces encountered the Russian KV and T-34 tanks on the Eastern front, the situation abruptly changed. To cope with this Russian tank threat, the Germans were forced to upgrade their existing weapons systems. The G-type StuG III built from late 1942 onwards, used a more powerful, long barrel 75mm L/48 gun. The early G-type had a square shaped gun mantlet. The superstructure was redesigned and an MG42 machine gun with shield, commander's vision cupola and smoke dischargers were added. The thin steel plates, known as Schurzen (skirts) were attached to the sides of the hull beginning in the spring of 1943. The type-42 assault gun mounted a 105mm howitzer on the StugG III chassis and was developed to fulfill the StuG III's original role of infantry support. Incorporating several minor changes, about 7,800 G-type StuG III's were produced. Highly detailed 1/35 scale model kit of the World War II German armored fighting-vehicle Sturmgeschtz III (StuG III). Built on the chassis of the proven Panzer III tank and fitted with 75mm anti-tank gun, the StuG III was often deployed by the German army for infantry close support. This model kit depicts the Sturmgeschtz III Ausf. G, which was the final and the most commonly produced model of the StuG series. The kit comes with 2 detailed crew figures in life-like poses, optional open or closed hatches, and lots of accessories.
It should be easy to name 3 breeds of dogsâbut can you do it under the pressure of 5 seconds twisting down, and with the other players staring at you, waiting for you to get flustered? Timeâs not on your side, so just say what comes to mind and risk ridiculous answers slipping out as time twirls down on the unique twisted timer! Itâs all in good fun with this fast-paced game where you have to Just Spit it Out!
You can decide the drawing turn according to your personal favor or in turns of the numbers
For the white paint and other light color paint part, the figures left on the canvas may be seen, you can double use the paint and try to cover with the thick paint
use the paint directly and do not add any water
the match the number of the paint and the figure on the canvas to fill in the paint
if you careless to fill in a wrong color, you can wait the paint to get day and then cover the wrong part with the correct color on the surface
wash the brush cleanly when you change to another color
for the large part, you can use the larger brush to paint, and for the small part, you can use the smaller brush to paint
wash the brush cleanly every time you finish painting for the next time use
professional canvas design for DIY oil paint
Note: Wood Frame does not included
For the Solid Wooden Frame, Please visit our storefront or search ASIN B00KD8HQ6K.
If you happen to have the paint on your clothe, please wash it immediately.
Please cover the lid of paint well when you do not use it, in case the paint gets dry.
The figures on the canvas may not be covered entirely, hope you do not mind.The paint we offer is enough for the normal use, please do not waste it in case of the paint shortage.
ANY OTHER QUESTION, PLEASE CONTACT US. THANK YOU.
A-36 Bonanza Airplane Model. The A-36 Bonanza Beechcraft model is a general aviation aircraft introduced in 1947 by the Beech Aircraft Corporation. As of 2007, it is still being produced by Hawker Beechcraft. There are more than 17,000 Bonanzas that have been built. The A-36 Bonanza Beechcraft model was designed by a team led by Ralph Harmon. All Bonanzas including A-36 Bonanza Beechcraft Model share an unusual feature: the yoke and rudder pedals are interconnected by a system of flexible bungees which assist in keeping the airplane in coordinated flight during turns. The bungee system allows the pilot to make coordinated turns using the yoke alone, or with minimal rudder input, during cruise flight. The twin-engine variant of the Bonanza is called the Baron, whereas the Twin Bonanza is a different design and not based on the original single-engine Bonanza fuselage. The A-36 Bonanza Beech Model has an improved deluxe interior, a new fuel system, higher take-off weight, from 1985 it was fitted with a Continental IO-550-BB engine and re-designed instrument panel and controls. There were 2,128 built and it is modified with the Tradewind Turbines turboprop conversion. Dimensions: 13.5L x 6W x 3.96H
Disneys 101 Dalmations Pup and Teddy Bear Cross Stitch Kit Contains: Complete counted cross stitch instructions, Design charts, Needle and Floss, 14-count white Aida fabric. Finished Design: 6-1/2 x 8-5/8
This is a Nicely detailed Tamiya 1/24 scale assembly and painting required plastic model kit of the 3rd generation Nissan Skyline GTR sports car.
It is a three-dimensional puzzle assembled in parts of 23 pieces. It is a three-dimensional puzzle of [good] and new genre. I can play Repeat exploded! Do not use the adhesive. - From children to adults can enjoy.
1-109 Scale. From the Model Power Postage Stamp Series. Fully painted with detailed history of aircraft, embossed stand super detailing. No assembly required.
No Assembly Required!
The "Chestnut Vendor" is a porcelain accessory that depicts a mother and son purchasing a bag of roasted chestnuts. The hand-painted figurine also features a lighted lamp post that is battery operated. This figurine is part of A Christmas Carol Series, which is contained in the Dickens
The most simple of punch needles. Easy to operate comfortable to hold. Best when used for three strands of embroidery floss or similar. Designed to complement the Dimensions Needle Punch kit program.
1/35 scale assembly kit depicting infantrymen from Field Marshal Rommel's vaunted Africa Corps. Scale : 1/35 Construction type : Assembly kit Photo-etch parts : Not included Decals : Not included Special feature 1 : Set includes 8 figures depicted in tropical uniform (4 figures feature long-sleeve shirts and trousers, 4 figures feature short-sleeve shirts and shorts). Special feature 2 : Comes with parts for both helmets and field caps to provide assembly options.
Colorbok Makit and Bakit Suncatcher Kits is a fun way to create your own suncatchers that look like stained glass. Each kit includes baking crystals, a metal frame and a suction cup. Simply pour the crystals into the frame and bake. It is that easy. Additional tools needed include tweezers, spoon, thread or string, aluminum foil, oven and baking sheet. Stained Glass Frog- Includes one frame and .74 ounces of crystals in Yellow, White, Green and Pink. Ages 6 .
TEDCO Simplest Motor (Age 8 )
A03414 Features: -1:32 Scale plastic Scale model kit.-Skill level: 1 (where 1 is for the beginner and 4 is for the more experienced modeler).-Number of parts: 71. Dimensions: -5 H x 2.5 W x 2 D, 0.5 lb. Warranty: -90 Days warranty.
The 2006 Shelby GT-H, painted in black and gold, was built to celebrate the 40th anniversary of the original Shelby GT350H. There were only 500 units built, all badged, plaqued and signed by Shelby and all only available from Hertz as rental cars.
Skill Level 2